進口不銹鋼高溫電磁閥（圖）

詳細內容：進口不銹鋼高溫電磁閥（圖） 德國泰科閥門（國際）有限公司—廣州總代理 德國泰科（TEK）專利技術、獨特設計、活塞結構、壽命超長、耐溫線圈、不易燒毀、精密鑄造、外觀精美。 應用范圍 船舶重工、石化、電力、機械、食品加工、干燥設備、暖通空調等。 超高溫電磁閥 技術參數說明 動作方式： 直動型、先導型、反沖型（無壓差型），根據口徑大小、介質壓力選擇其中一種。 控制方式： 常閉式、常開式，根據工況要求選擇。 電源電壓： AC24V、AC36V、AC127V、AC220V、AC380V、DC12V、DC24V、DC36V、DC72V、DC110V、DC220V，根據工況要求選擇。 防護型式： 普通型、防塵型、防水型、防爆型、船用型，根據工況要求選擇。 壓力范圍： 0-0.3MPa（無壓差）、0-0.6MPa（無壓差）、0.03-0.6MPa、0.03-1.6MPa、0.03-2.5MPa、0.03-4.0MPa、0.03-6.3MPa 介質溫度： 0-200℃、0-250℃、0-300℃、0-600℃，根據工況要求選擇。 環境溫度： -20-60℃、-40-60℃，根據工況要求選擇。 連接方式： 內螺紋連接、法蘭連接，根據工況要求選擇，但是通徑超過DN50，均為法蘭連接。 閥體材質： 304不銹鋼、316不銹鋼，根據工況要求選擇德國泰科選型指導：德國泰科電磁閥產品規格品種齊全，主要生產：水用電磁閥、蒸汽電磁閥、燃氣電磁閥、空氣電磁閥、真空電磁閥、油用電磁閥、制冷劑電磁閥、防爆電磁閥、防腐電磁閥、超高壓電磁閥、超高溫電磁閥、超低溫電磁閥、帶手動電磁閥、自保持電磁閥、緊急切斷電磁閥（通電關閉）、緊急切斷電磁閥（斷電關閉）、信號反饋電磁閥、脈沖除塵電磁閥、可調流量電磁閥、純凈液體專用電磁閥、雙流量電磁閥、三通電磁閥（一）、三通電磁閥（二）、三通電磁閥（三）、潛水電磁閥、自帶濾網電磁閥等，共有六十個糸列，上萬個規格品種。電磁閥產品分類方式按動作方式分類 A、直動式 B、先導式、C、反沖式(無差壓)控制方式分類 A、常閉式 B、常開式按外殼防護型式劃分 A、普通型 B、防塵型 C、防水型 D、防爆型按接管連接型式分類 A、螺紋式 B、法蘭式按流通介質分類 蒸汽、空氣、水、油、燃氣、制冷劑按工作壓力分類 W-無壓差:0～0.6MPa、L-低壓:0.03～0.6MPa、M-中壓:0.03～1.6MPa、H-高壓:0.03～2.4MPa、C-超高壓：0.1～380MPa (共12種超高壓范圍)注：高壓只適合小口徑閥按額定電壓分類 交流：AC24V、AC110V、AC220V、AC127V、AC380V直流：DC12V、DC24V、DC110V、DC220V按線圈功率分類 8(0.34A)、14(0.6A)、24(1A)、50(2.1A)(交流為VA、支流為W)按介質溫度分類 -196℃、-50℃、+60℃、+120℃、+200℃、+250℃、+350℃、+450℃ “四兩撥千斤”，先導電磁閥正是根據這個道理，比較適合于大口徑，高壓力工況下使用。但是一定要注意的是，流通的介質要有一定的壓力。我廠生產的各種先導型電磁閥要求介質的壓力應大于0.03Mpa才能正常使用。反沖型電磁閥原理：反沖型電磁閥（即無壓查式），也稱為分步直動式電磁閥，是集直動式和先導式結構為一體的電磁閥。它既可以在介質無壓力的工況下靠線圈的吸力打開主閥塞，又可以在介質壓力較高的工況下，使主閥塞產生壓差而開啟電磁閥。當線圈（1）通電，動鐵芯（3）吸合，打開主閥塞（5）上的先導孔（7），同時帶動主閥塞（5）開啟，介質流通。故介質無壓力主閥塞（5）靠線圈（1）的吸力開啟，介質有壓力的情況下，主閥塞（5）靠壓差開啟。反之亦然。適用范圍：一般情況下，反沖型電磁閥的線圈體積和功率比先導型的大，比較適合介質壓力從零到幾公斤的范圍下使用，并且也適合較大的電磁閥通徑。特別要主要的是，反沖型電磁閥必須水平安裝！口徑較小的反沖型電磁閥也可以垂直安裝，但用戶要特別提出。 German TEK Valves (International) Co., Ltd. - Guangzhou distributor German TEK (TEK) patented technology, unique design, the piston structure, long life, temperature coil, not burned, precision casting, attractive appearance. Applications Shipbuilding Industry, petrochemical, electricity, machinery, food processing, drying equipment, HVAC, etc. Ultra-high temperature solenoid valve Technical Parameters Action by: Direct acting, pilot type, recoil type (no pressure type), according to the aperture size, medium pressure select one of them. Control mode: normally closed, normally open, according to the conditions required to select. Power supply voltage: AC24V, AC36V, AC127V, AC220V, AC380V, DC12V, DC24V, DC36V, DC72V, DC110V, DC220V, under the conditions required choice. Protection Type: ordinary type, dust-proof, waterproof, explosion proof, marine type, according to the conditions required to select. Pressure range: 0-0.3MPa (no pressure) ,0-0 .6 MPa (no pressure) ,0.03-0 .6 MPa ,0.03-1 .6 MPa ,0.03-2 .5 MPa ,0.03-4 .0 MPa ,0.03-6 .3 MPa medium temperature: 0-200 ℃ ,0-250 ℃ ,0-300 ℃ ,0-600 ℃, under the conditions required choice. Ambient temperature: -20-60 ℃, -40-60 ℃, under the conditions required choice. Connection: internal thread, flange connection, according to the conditions required to select, but the diameter exceeds DN50, are flanged. Body material: 304 stainless steel, 316 stainless steel, according to the conditions required to select German TEK Selection guide: German TEK solenoid valve product range specifications, the main production: water solenoid valve, steam solenoid valve, gas solenoid valve , air solenoid valve, the vacuum solenoid valve, oil solenoid valve, a refrigerant solenoid valve, solenoid valve explosion, corrosion solenoid valve, high pressure solenoid valve, ultra-high temperature solenoid valve, cryogenic solenoid valve, solenoid valve with manual, self-holding solenoid valves emergency shut off solenoid valve (energized closed), emergency shut-off solenoid valve (power off), the signal feedback solenoid valve, pulse dust solenoid valve, adjustable flow solenoid valve, pure liquid dedicated solenoid valve, double flow solenoid valve, three-way solenoid valve (a), three-way solenoid valve (two), three-way solenoid valve (three), diving solenoid valve, solenoid valve strainer comes with a total of sixty Si column, tens of thousands of varieties of specifications. Solenoid Valve Products classified by way of action mode A, direct-acting B, pilot, C, recoil (no pressure) control classification A, normally closed B, normally open type enclosure divided by A, ordinary type B, dust-C, waterproof D, explosion-proof connection type classification according takeover A, screw-type B, flange type classification by circulating medium of steam, air, water, oil, gas, refrigerant pressure by job classification W- No pressure: 0 ~ 0.6MPa, L-Low: 0.03 ~ 0.6MPa, M-medium pressure: 0.03 ~ 1.6MPa, H-pressure: 0.03 ~ 2.4MPa, C-ultrahigh pressure: 0.1 ~ 380MPa (a total of 12 kinds of super- high pressure range) Note: only suitable for small-diameter high-pressure valve classification according to the rated AC voltage: AC24V, AC110V, AC220V, AC127V, AC380V DC: DC12V, DC24V, DC110V, DC220V coil power by Category 8 (0.34A), 14 (0.6A) , 24 (1A), 50 (2.1A) (exchange of VA, tributaries W) at medium temperature classification -196 ℃, -50 ℃, +60 ℃, +120 ℃, +200 ℃, +250 ℃, +350 ℃, +450 ℃ "Skillfully deflected the question," the pilot solenoid valve is based on this principle, more suitable for large-diameter, high-pressure conditions used. But we must note that the circulation of the media have a certain pressure. I plant a variety of pilot operated solenoid valves require media pressure should be greater than 0.03Mpa to normal use. Recoil solenoid valve principle: recoil solenoid valve (ie no pressure check-in), also known as step direct acting solenoid valve, is direct-acting and pilot-type structure as one of the solenoid valve. It can be a stress condition in the medium by suction of the coil to open the main valve plug, but also in the medium high pressure conditions, the pressure difference is generated so that the main valve plug and opening the solenoid valve. When the coil (1) is energized, the plunger (3) pull, open the main valve plug (5) on the pilot hole (7), while driving the main valve plug (5) open, medium flow. The pressure medium without main valve plug (5) by the coil (1) of the suction opening, media is under pressure, the main valve plug (5) by the pressure on. And vice versa. Scope: In general, the recoil valve solenoid coil size and power than the pilot type of large, suitable for medium pressure from zero to the use of a range of a few kilograms, and is suitable for larger diameter solenoid valve. In particular, the main thing is, recoil solenoid valve must be installed horizontally! Smaller diameter recoil solenoid valve can also be installed vertically, but the user should like to highlight. 進口不銹鋼高溫電磁閥（圖）